Looking to add that high-end Bowers & Wilkins illuminated look to your new BMW 5 Series G60 interior?
In this tutorial, we’re breaking down the full installation process for our B&W Style LED Ambient Light Covers designed specifically for the BMW 5 Series G60. We will guide you through door panel disassembly, trim removal, and plug-and-play wiring to seamlessly integrate the light function with your factory ambient lighting system.
If you’re planning a DIY upgrade for your personal vehicle, or if you run a shop looking to carry these retrofits for your local customers, hit the link below for product details, fitment info, and reseller inquiries.
If you are interested in this product too, can click the link for more details: B&W Design LED Ambient Light Cover for BMW 5 Series G60
1. Before installing the ambient cover
2. Use a pry – plate to pry open the triangular position of the original car 
3. Pull it outwards to remove the triangular trim panel
4. Open the original car door handle and remove the small cover inside
5. After removing the small cover, remove the fixing screw
6. Remove the small cover plate here
7. Remove the screw here
8. There are 2 screws in total on the front door. After removing the screws, use a pry – plate to remove the door panel
9. After removing the door panel, unplug the connector
10. After removing the door panel, remove the heat – staked points of the original car’s mid – range speaker cover and take off the mid – range speaker cover.
11. Use wire cutters to remove the heat – staked points of the mid – range speaker cover
12. The effect after removing the original car’s mid – range speaker cover
13. The original car’s mid – range speaker cover
14. Prepare to install the luminous cover
15. The effect after installing the mid – range speaker cover
16. After replacing the cover, lock the provided screws
17. Remove the heat – staked points of the original car’s tweeter
18. Install the cover plate and lock the screws.
19. Plug in the connector of the luminous cover plate. Make sure to make a connection at this connector. Otherwise, the ambient light will turn white after addressing.
20. Please make sure to connect the cup – holder light connector.
21. The restoration effect after installation.
22. Remove this cover first.
23. After removing the cover, remove the screws.
24. Remove the cover here.
25. After removing the cover, remove the screws.
26. Remove the cover here.
27. After removing the cover, remove the screws.
28. There are 3 screws in the rear – door. After removing the screws, use a pry – plate to remove the door panel.
29. Remove the door panel.
30. Use wire – cutters to remove the heat – staked posts, and then remove the mid – range speaker cover.
31. Remove the heat – staked posts.
32. Remove the original car’s mid – range speaker cover.
33. Install the luminous cover of the rear – door mid – range speaker.
34. Lock the screws.
35. Please make a connection for the light – head here.
36. Install and restore.
Audi
BMW
Mercedes Benz
BYD
BAIC MOTOR
Cadillac
Chery
Denza
Ford
Geely/ZEEKR
Honda
Hyundai Kia
Jaguar
Jetour
Jeep
Lamborghini
Land Rover
Lexus
Li Auto
Mazda
Nissan
Porsche
Tesla
Toyota
Volkswagen
Volvo