Transform your BMW 5 Series G68/G60 2024+ with a premium saddle upgrade, enhancing the interior with a sophisticated and elegant design. This luxury upgrade elevates both the style and comfort of your vehicle, perfect for a refined driving experience.

Product link :BMW 5 Series G60 Center Console Ambient Light Saddle Light

Installation Tip: Please turn off the vehicle's ignition before starting. It is highly recommended to use a plastic non-marring pry tool to prevent scratching the high-gloss trim or the crystal surface of your car.

Installation Video below:

Step-by-Step Installation

 

1. Remove the Armrest Liner：

Open the center armrest box and take out the bottom rubber liner to reveal the hidden screws.

2. Remove the First Screws：

Use a screwdriver to remove the two visible screws from the bottom of the box.

3. Pry Open the Inner Liner：

Use a plastic pry tool to gently pop up and remove the inner storage compartment.

4. Lift the Center Control Panel：

Unscrew the two deeper screws inside, then lift the entire center control panel assembly upward.

5. Swap the Crystal LED Module：

Flip the panel over, remove the back screws holding the factory trim, and replace it with the new Crystal LED Frame Module.

6. Plug-and-Play Wiring：

Place the control box into the console cavity. Connect the power harness directly to the factory cup holder light plug (no wire cutting).

7. Test and Reassemble：

Turn on the car to test the ambient light sync. Once working, follow the steps in reverse to reinstall everything.

 

Troubleshooting: If the center console light does not turn on after connecting the controller

Back to list
Older Mercedes-Benz E-Class W214 Passenger Dashboard LED Panel Retrofit Guide (2024–Present)

Leave a Reply

Your email address will not be published. Required fields are marked *